License #B10503801
Commercial Security · Blog

How to Secure a Construction Site Over the Holiday Shutdown

A holiday break can leave a construction site empty for ten days or more. Here is how to prepare it before the last crew leaves, and what to check when work starts again.

Published November 17, 2026
TXP Security Team

How long will your site sit empty this holiday season? On many projects, the gate closes a few days before Christmas and stays shut until after New Year’s Day. For that whole time, there is no morning crew to notice a cut fence or a camera that has stopped working. This guide covers theft, unauthorized access and getting your security system ready for the closure. It works alongside your wider shutdown procedures for safety and weather protection.

Padlocked construction site gate during a holiday shutdown

Your Holiday Shutdown Plan at a Glance

Most of the work happens in the week before the break, which leaves time to fix anything that turns up.

When What to do
A week before Walk the site and run the first full system test
Last working day Confirm recording and alerts, then lock up and photograph the site
During the break Check that cameras are online, especially after a storm or outage
First morning back Walk the fence line and check the recorded footage

Walk the Site Before You Lock the Gate

Walk the property about a week before the break, ideally with the superintendent and whoever looks after the security system. Check the physical barriers as well as the cameras and alarms, while crews are still there to make repairs:

  • Fencing and gates: Repair damaged fence panels, make sure every gate closes fully, and replace worn locks or chains.
  • Openings in the building: Close off any door or window someone could use to get inside the structure.
  • Tools and portable equipment: Move anything small and valuable off site if it does not need to stay, and lock up the rest.
  • Machinery and keys: Secure heavy equipment according to your site procedures. Account for every equipment key, and write down who holds one during the closure.
  • Camera views: Look at what each camera can actually see, and move stacked material, dumpsters or parked equipment that now blocks the view.
  • Signs on the fence: If the site is monitored, put signs at the gate and along the fence where they can be read from the street.
  • Photos and a list: On the last day, take dated photos of the site and write down the valuable material and equipment you are leaving behind, with serial or identification numbers where you have them.
  • Your insurance terms: Ask your insurer whether your builder’s risk policy has any requirements for extended closures, so your plan matches them.

Copper wire is a common target on a closed site. Where you can, delay copper deliveries until work resumes, and keep anything that has to stay on site locked in a secure container. We cover how thieves find out that copper has arrived, and how protection changes at each stage of a build, in our guide on how to prevent copper theft on a construction site.

Who Will Still Have Access to the Site?

By the end of the year, quite a few people may have a way into your site. Temporary workers may still know the gate code, and subcontractors may still hold keys to a container or trailer. Review active cards, shared codes and outstanding keys:

  • Gate codes and cards: Turn off codes and cards for anyone who does not need to enter during the break, and turn them back on by name when crews return.
  • Shared codes and combinations: If a code was given to a whole crew, change it. That is easier than trying to work out who still knows the old one.
  • Container and trailer keys: Ask subcontractors to return their keys before they leave, or write down who is keeping them.
  • People allowed on site during the break: Write down the few people who may enter while the site is closed, such as a project manager doing a planned check. This list is separate from your emergency call list, although some names may appear on both.

Moving Deliveries Out of the Closure

Some deliveries are booked weeks in advance, before anyone has set the holiday schedule. A driver who finds the gate locked may leave the load outside the fence. Go through open orders with each supplier, move anything that falls during the break to the first week back, and ask them in writing not to drop anything at the gate while the site is closed.

Fuel and rental equipment deliveries often run on their own schedules, so check those separately. If a delivery cannot be moved, make sure the people on your call list know the date, so a truck at the gate does not come as a surprise.

Keeping Your Cameras Powered and Connected

If your cameras or lights depend on temporary site power, find out whether that power will stay on. Some projects turn it off over the holidays, and a generator can run out of fuel partway through a long break. A camera also needs the internet or cellular connection it uses for alerts. Without it, the camera may keep recording, but alerts and remote viewing stop. Check both before you leave:

  • Temporary power: Ask the electrical subcontractor whether the temporary service will stay on for the whole break.
  • Generators: Check how long the fuel will last, and who will refill it if the break runs longer than planned.
  • Backup batteries: How long a battery keeps an alarm panel or communicator running depends on the equipment and the battery’s condition. Ask your security provider what runtime to expect, and plan for the full length of the closure.
  • Solar camera units: Cameras that run on solar panels and batteries do not depend on site power, but short winter days give the panels less time to charge. Confirm that the batteries are in good condition and that the unit is sized for winter use.
  • The internet or cellular connection: Check the modem, router or cellular device the cameras use, and make sure it runs on a power source that will stay on.
  • Offline notices: Ask whether your system can send a notice when a camera goes offline or power drops, and make sure that notice goes to someone who will see it during the break.

Will Your Footage Still Be There When You Come Back?

Even when the cameras are powered and connected, a few settings can let you down over a long closure. Most systems on a job site are set up for a working site, with crews coming and going every day. Review these settings with your security provider before the break:

  • How many days the recorder keeps: Recorders write over the oldest footage once their storage is full. If yours keeps seven days and the site is closed for twelve, the first nights of the break may be gone before anyone looks. Ask how many days your system holds, and whether it can be extended for the closure.
  • Detection zones: Some parts of the site may have been left out of the detection settings because crews walk through them all day. Others are left out for good reasons, such as a public road or trees moving in the wind. Ask your provider to turn on the areas that need watching during the closure, and test them so passing traffic does not cause constant alerts.
  • Lighting timers: Lights on timers or sensors should keep working at night during the break. Make sure they are not on a circuit that will be switched off with the temporary power.

Test the System Early, Then Again on the Last Day

Run a full test about a week before the shutdown, then confirm everything again before the last crew leaves. Finding a fault on the last afternoon leaves little time to arrange repairs or replacement equipment. Let your monitoring provider know before you send test signals, so they are handled as a test and not a real alarm:

  • Recording on every camera: Play back the previous night’s footage from each camera. A live picture only shows that the camera is on, not that it is saving video.
  • Signals to the monitoring station: Send a test signal and confirm that the monitoring station received it.
  • The full alert path: Trigger a test alert and make sure the right person gets the call and knows the site is closed.
  • Night views: Look at recent nighttime footage to confirm the lights you are leaving on still give the cameras a clear view of the gate and storage areas.
Expert Tip:

Check how your alarm arms and disarms on its own. A panel set to a weekday schedule may disarm itself at seven in the morning in the middle of the closure, with no one on site. Ask your provider to switch it to a holiday schedule with the exact closure dates, and agree how it will be disarmed for planned visits.

How Live Video Monitoring Works When No One Is on Site

Cameras on their own record what happens, but if no one looks at the footage until January, the recording mostly helps after the damage is done. With live video monitoring, a trained operator responds when the cameras detect a person or vehicle in an area that should be empty, such as inside the fence or near a container. It does not mean someone is watching every camera all day.

This is different from camera alerts sent to a phone. An app notification only helps if someone sees it, understands what it shows and knows who to call. If your site relies on phone alerts without a monitoring service, name the person who will check them during the break and decide when to call the police.

When an alert comes in, the operator looks at the live video and the clip that set it off. Where speakers are installed, the operator can give a live warning to the person on camera. If it looks like a break-in, the operator follows the response plan set up for your site, which can include calling your contacts and asking the police to respond. How quickly police arrive depends on the local department. You can read more about how the service works on our live video monitoring page.

If you get a call about activity during the break, let the operator and the police handle it, and do not drive out to look for an intruder yourself. Once the site is safe, go through the footage so you know what was affected.

Your Call List for the Holidays

When an operator calls about activity on your site, someone needs to answer. Over the holidays, the person at the top of the list may be traveling or with family and may not hear the phone. Build the list around the closure dates and the people who will be reachable on them:

  • Primary and backup contacts for each date: If people are away on different days, write down who covers each one.
  • Current contact numbers: Call every number on the list yourself. Lists made at the start of a project often include people who have since moved to other jobs.
  • Someone who knows the schedule: The operator needs a contact who can confirm whether a visit to the site was planned.
  • Safe access for responders: Agree in advance how police can get through the gate, and confirm the arrangement with your monitoring provider. Do not assume responders know a lockbox code unless it has been shared with them, and never ask anyone from your team to meet a possible intruder at the site.

Checking the System While the Site Is Closed

Someone should look after the security system while the site is empty. That does not have to mean a daily visit, but a named person should confirm that the cameras are online and saving footage, and act if they are not. How often you check depends on what is on the site and how exposed it is:

  • Regular checks from a phone or computer: Confirm that each camera is online and that recent footage is being saved.
  • Checks after a storm or power outage: Weather and outages can knock equipment offline, so look at the system again after either one.
  • Planned site visits: Anyone visiting should let the monitoring station know first, so the visit is not treated as an intrusion. No one should go alone to check out an alert.
  • A plan for an offline camera: Decide in advance who arranges a repair if a camera or connection goes down during the break.

What to Check on the First Morning Back

Inspect the site before normal work starts, because once crews and deliveries are moving around, damage and missing items become much harder to spot. Schedule the inspection for the first morning back, before work and deliveries resume, and cover these checks:

  • Walk the fence line: Look for cut fencing or forced container doors.
  • Review the recorded footage: Check the recorded video for any night that lines up with damage you find.
  • Save footage of any incident: If something is damaged or missing, save the footage from those nights right away, before the recorder writes over it.
  • Compare with your photos and list: Use the photos, list and serial numbers from the last working day to confirm what is still there.
  • Turn access back on by name: Reactivate codes and cards only for the people who are returning.
  • Reset the schedules: Put detection zones, lighting timers and alarm schedules back on the normal work week.
TXP Security

Planning a Holiday Shutdown on a Texas Job Site?

TXP Security works with general contractors and project teams on active job sites across Texas. Before your last crew leaves for the holidays, we can test your cameras and alarm signals with you, so you know the system is recording and sending alerts before the gate is locked. To set up a test ahead of your shutdown, call 866-322-9555.

TPL
Written By
TXP Security Team
Texas DPS Licensed · License #B10503801

Related Reading

Articles You May Find Useful

Service Areas

TXP Security Service Across the State

Call 866-322-9555

Frequently Asked Questions

Do security cameras keep recording if temporary power is turned off?

Not unless they have another power source. A generator with enough fuel, or a solar unit sized for winter, can keep them recording through the break.

Should we change the gate code before a holiday shutdown?

Yes, if it was shared with crews or drivers. Change it, and give the new code only to the people approved to enter during the break.

How long should a recorder keep footage over a holiday shutdown?

Long enough to cover the whole closure and the days after it, while you inspect the site and look into anything you find. Allow for a reopening that runs late, and confirm the actual number of days with your provider.