License #B10503801

Alarm Monitoring · San Marcos

Commercial Alarm Systems in San Marcos, TX

  • Alarm installations and takeovers across San Marcos and Hays County
  • Wireless or hardwired panels with encrypted sensors
  • Around-the-clock central station monitoring and dispatch
  • Licensed TXP Security technicians, never subcontractors
Get a free quote for your alarm system.

No obligation. We respond within one business hour.

By submitting, you agree to be contacted by TXP Security.
Installed Across Hays County

Commercial Alarm System Installation and Monitoring in San Marcos, TX

Offices, retail units, clinics, student housing, and self-storage sites across San Marcos and Hays County are installed, serviced, and monitored by the same TXP Security team, with no subcontractors involved. New systems, takeovers of equipment already in place, and upgrades to older panels are all handled by that team.

  • Takeovers and upgrades of compatible equipment
  • Dual-path cellular and internet communication
  • Encrypted door, motion, and glass-break sensors
  • Around-the-clock central station monitoring
Arming a commercial alarm system on a wall-mounted keypad
One Licensed Alarm Team

Business Alarm Systems for San Marcos Properties

New systems, monitoring, takeovers, and upgrades are handled by the same licensed TXP Security team, with no part of the work passed to a subcontractor. That includes buildings with a panel already on the wall, where the takeover and any replacement parts are covered in one proposal.

San Marcos: Downtown, Texas State University area, Blanco Vista, Kissing Tree, Willow Creek, La Cima
Hays County and the I-35 corridor: Kyle, Buda, Wimberley, Dripping Springs, Driftwood
Mon to Fri 8am to 6pm office · 24/7 monitoring and dispatch

Our commercial services in San Marcos

One Local Team for Every System You Run.
Alarm Signals Handled 24/7

Commercial Alarm Monitoring in San Marcos

A self-storage site with rows of roll-up doors and a gate that closes at six does not need the same call list as a retail suite holding cash overnight. TXP Security sets both up under commercial alarm monitoring in San Marcos, TX, through C.O.P.S., a UL-listed central station, where operators work from the instructions held for that property. Panic buttons, low battery warnings, power failures, and a panel that goes silent are all reported alongside intrusion signals.

What monitoring includes:
  • Alarm and trouble signals Intrusion, panic, low battery, power loss, and communication failure.
  • Verification calls The property is called first when the response instructions require it.
  • Event history Arming, disarming, and alarm records stay available for later review.
  • Temporary changes Holiday hours, added codes, and site notes can be updated on file.
Central station operator handling commercial alarm monitoring and video verification
Verify First, Then Dispatch

Video Verified Alarm Systems in San Marcos, TX

Without alarm video verification, someone has to drive to the property to find out whether an alarm was real. TXP Security installs video verified alarm systems in San Marcos so the operator can see the triggered area on camera and report what is actually there, which removes that trip for most signals. Verification is usually set on the zones where false alarms start, such as the gate at a storage facility, a loading dock, or the exterior doors of a student housing building.

Fewer Callouts

Staff are not sent out to check a signal that video already answers.

Zone Selection

Verification can be set on some zones and left off others entirely.

Camera Compatibility

TXP Security checks which recorders and security cameras support verification.

Stored Evidence

Verified events stay stored with the alarm record for later use.

Compatibility Before Replacement

Alarm Installation, Compatibility Checks, and Takeovers in San Marcos

Many San Marcos buildings already have a panel on the wall, often a DSC or Honeywell unit installed years earlier and never updated since. TXP Security handles alarm installation and system takeovers for both cases, new construction with nothing in place and buildings where the existing panel still runs. Panel generation, sensor frequency, and whether the communicator can still reach a central station are what decide between a takeover and a replacement.
What Can Usually Stay
  • Hardwired door and window contacts
  • Existing conduit and wiring runs
  • Sirens, strobes, and pull stations
What Usually Gets Replaced
  • Panels with no cellular communicator
  • Sensors on discontinued frequencies
  • Keypads that no longer display zones
Different Buildings, Different Risks

Alarm Systems for San Marcos Businesses and Facilities

A storage facility, a student apartment building, and a clinic each carry a different risk after closing. Areas, codes, and after-hours rules are set differently for each, along with which parts of a building stay armed while people are still inside.
  • Retail and outlet centers
  • Offices and professional services
  • Restaurants, bars, and hospitality
  • Medical and dental clinics
  • Warehouses and distribution centers
  • Schools, colleges, and childcare
  • Auto dealerships and service shops
  • Construction and development sites
  • Student housing and multifamily
  • Property management companies
  • Self-storage facilities
  • Churches and houses of worship
Meet the Team On Site

Get a Commercial Alarm Quote for Your San Marcos Property

A new system, a takeover, or a single upgrade can all be scoped in the same visit, by the licensed team that will carry out the work. Pricing covers equipment, installation, and monitoring for the property as it operates now.

San Marcos Commercial Alarm Questions

Does a San Marcos business need an alarm permit?

San Marcos requires a permit for alarmed properties. Requirements and fees are set by the city and change from time to time, so it is worth confirming the current rules for the address. TXP Security can document the equipment and monitoring setup for the application.

How can video verification help reduce false alarms in San Marcos?

The operator has video from the zone that tripped, so a door left open by a cleaning crew or a sensor knocked out of position can be identified before anyone is dispatched. Alarms that do reach dispatch carry a description of what was seen.

Can TXP Security take over an alarm system already installed in San Marcos?

Usually. Panels from most major manufacturers can be taken over, and sensors that still report reliably can stay in place. Where a system cannot be taken over, it is normally because the panel is too old to support current communication or the sensors run on a frequency no longer made.

Is no-contract alarm monitoring available for San Marcos businesses?

Yes. Contract and no-contract monitoring are both available, and the arrangement depends on the equipment and services selected for the property.

$1 per subscriber goes to Wounded Warrior Project every month.